
POLYGUM® Paper Seal Adhesive
Water-based synthetic resin adhesive for paper-to-paper outer wraps and sleeve seams.
A double-wall or ripple cup is only as good as the joint holding its outer layer. If that joint opens on the machine, the line stops. If it lets go when hot tea is poured in, the customer notices.
Synergy Bonding manufactures adhesives for paper cup makers who produce premium cups, insulated cups and cup sleeves. With over 19 years of adhesive manufacturing and in-house R&D across two Pune plants, we match the setting speed of the glue to the speed of your machine.
A look at our people, plant, and processes behind consistent paper and packaging adhesives.
A standard single-wall cup is coated with PE, and its side seam and bottom are sealed by heat, so it usually needs no glue. Adhesive comes in when a cup has more than one layer, or when it is made without a PE coat.
| Cup type | Joint | Adhesive needed? |
|---|---|---|
| Single-wall PE-coated cup | Side seam and bottom | Usually no, heat or ultrasonic sealing |
| Ripple cup | Corrugated outer wall onto the inner cup | Yes |
| Double-wall cup | Outer paper wall onto the inner cup | Yes |
| Insulated cup | Outer insulating wrap | Yes |
| Cup sleeve or holder | Sleeve side seam | Yes |
| Uncoated or barrier-coated cup | Side seam, depending on board and process | Often yes, check with your board supplier |
| Factor | Water-based adhesive | Hot melt adhesive |
|---|---|---|
| Setting speed | Fast, but needs a short drying time | Sets almost instantly on cooling |
| Best for | Moderate-speed lines, sleeves, paper-to-paper joints | High-speed ripple and double-wall lines |
| Equipment | Simple roller or nozzle application | Needs a hot melt tank and applicator |
| Clean-up | Washes off with water | Needs heat and scraping |
We supply both types and help you choose based on your machine speed and setup. See our hot melt adhesive page for more on hot melt systems. Our standard hot melt grades are made for edge banding, so cup line hot melt is formulated to order.
| Product | Best suited for |
|---|---|
| POLYGUM® Paper Seal Adhesive | Paper-to-paper outer wraps and sleeve seams |
| Hot melt (made to order) | Instant-set outer wall fixing on fast ripple and double-wall lines, formulated for your machine |
| Custom grades | Adjusted tack, open time or setting speed for your machine |

Water-based synthetic resin adhesive for paper-to-paper outer wraps and sleeve seams.
| Buyer | Typical need |
|---|---|
| Paper cup manufacturers | Adhesive for ripple, double-wall and insulated cups |
| Sleeve and holder makers | Seam adhesive for printed sleeves |
| Cup and plate units | Cup adhesive plus paper plate lamination adhesive for plate lines |
| Paper product converters | Cups alongside paper bag adhesive and other paper work |
| Reason | What it means for you |
|---|---|
| 19+ years in adhesives | Deep experience with paper and packaging bonding |
| In-house R&D | Grades tested against real cup stock and machine speeds |
| Both technologies | Water-based and hot melt from one supplier |
| Bulk supply | Two plants and pan-India dispatch for steady orders |
| Private label | Available through our private label programme |
Most single-wall PE-coated cups are heat sealed and need no glue. Ripple, double-wall and insulated cups, and cup sleeves, need adhesive to fix the outer layer.
Hot melt suits high-speed ripple lines because it sets almost instantly. Water-based adhesive works well on moderate-speed lines and for sleeves.
The adhesive is not setting fast enough for the machine speed, or too little is applied. A faster grade or hot melt usually solves it.
Yes, when the right grade is used. The outer wall does not touch the drink directly, but it still has to handle the heat passing through the inner cup.
Yes. We supply cup makers across India, with custom grades for larger volumes.
Contact
Adhesive manufacturer, India — samples, pricing & partnerships
Choose the path that fits you: a tracked business enquiry for distributor, export, bulk, or private-label work — or a fast WhatsApp message for urgent questions.
For distributor, export, bulk orders, or private label — submit here so our team can track and follow up in CRM.
Same details below are formatted and sent to our sales WhatsApp.